beautypg.com

Avery Dennison 7410 MonarchNet2 Smart Relay User Manual

Page 9

background image

9

A b o u t t h e S m a r t R e l a y C o u n t e r

The Smart Relay counter keeps your batches in order. Use the collation
number to put printed labels back into the order they were sent to the
primary printer. To use the Smart Relay counter, enable the counter and
then set the row and column positions.

The collation number prints on each batch printed on both the primary and
partner printers. Batches are numbered in the order they are received, not
in the order they are printed. The collation number refers to the batch, not
the individual labels in a batch. For example, a batch of ten labels would
have the same collation number on them, so they could be kept together.
We recommend only sending batches of one.

To stop printing the collation number on formats, use this command: SET
PRN REL COUNT NONE
.
♦ The counter field appears in

Bold, Reversed type - design
formats with the counter field’s
height and width in mind, so data
is not overwritten.

♦ The counter always counts to

9999 and then starts back at 0.
The value entered with the
console command
(SET PRN REL COUNT 10) is

the value used for the next label.

♦ The counter value is saved when

you turn off the printer.

♦ Repeating a canceled batch uses

the next number in sequence.
There is no way to decrement the
counter
.

♦ Batches sent to the partner

printer from other sources
(besides the primary printer) are
not incremented and have no
Smart Relay collation field.

Smart Relay Counter Field