Avery Dennison 7410 MonarchNet2 Smart Relay - Manual (Page 7)

7
Relay Partner Identification
Sets the Smart Relay port to None (no partner printer) or S2 (partner printer
connected to serial port 2).
Note: After sending this command, turn off the printer. Wait several
seconds and then turn on the printer for the command to take effect.
Example SET PRN REL POR S2
Sets the Smart Relay port to serial port 2 (enables the Smart Relay system).
Example SH PRN REL POR
Shows the Smart Relay port.
Example CLEAR PRN REL POR
Returns the Smart Relay port setting to the default, which is None.
Relay Filter
Sets the primary Smart Relay filter type as
OFF Does not forward any data - primary printer prints all batches.
NONE Forwards ALL data to primary AND partner printer – batches
print on both the primary and partner printers
RFID Forwards RFID batches to the partner printer.
Non-RFID Forwards non-RFID batches to the partner printer.
Setting the Smart Relay Filter to None causes the batch to print on BOTH
the primary and partner printers. To use this option, you may need a custom
script (application) to perform additional filtering. For example, a custom
application filters which format is printed between two printers loaded with
different-sized supplies: 4x2 and 4x6. Our Professional Services group can
develop custom RFID scripts (applications) or other types of data
manipulation scripts. Call Customer Service for more information.
Example SET PRN REL FIL NONRFID
Sets the Smart Relay filter to non-RFID, so batches with no RFID Data Field
are sent to the partner printer.