Avery Dennison 7410 MonarchNet2 Smart Relay - Manual (Page 8)

8
Example CLEAR PRN REL FIL
Returns the printer Smart Relay filter setting to the default, which is None.
Relay Counter
Sets the primary Smart Relay counter to None (no counter is used) or
beginning counter value (0-9999).
Example SET PRN REL COUNT 1
Sets the Smart Relay counter (collation) to one. For more information about
the counter, see “About the Smart Relay Counter.”
Example CLEAR PRN REL COUNT
Returns the Smart Relay counter to the default, which is 0.
Relay Field Position
Sets the Smart Relay counter (collation) field position in dots as row and
column on the label.
The usable maximum values are dependent on printhead density (203 dpi or
300 dpi). The maximum label size is four inches wide by eight inches tall.
Printhead Density Row Column
203 0-812 0-1624
300 0-1200 0-2400
Note: The Smart Relay Counter Field overwrites any format data in the
same location. Make sure your format is designed with the Smart
Relay Counter Field’s height and width in mind, so data is not
overwritten.
Example SET PRN REL POS 10 5
Sets the Smart Relay counter field position on the label to 10 (for the row)
and 5 (for the column).