Set the computer’s ip address, Transfer your product data file to your printer, Set the computer’s ip address: -5 – Avery Dennison FreshMarx 9415 System Administrator Guide User Manual

Page 35

Set the computer’s IP address:

1. Start the Edit Utility on the computer.

2. Click Setup, then Network.

3. Enter the IP address of the printer in the IP address field.

4. Click OK.

Transfer your product data file to your printer:

1. Connect the printer to your computer using an Ethernet cable.

2. Turn on the printer.

3. Start the Edit Utility.

4. Click Update, Product Data. The File Open dialog box appears.

5. Open the updated product data (.dat) file.

The printer enters download mode and “Updating Data Please Wait…” appears on
the printer’s touch screen.

When the update is complete, the printer beeps and you see:

Note:

The printer does not restart after updating the data file.

Updating your printer 4-5