Avery Dennison FreshMarx 9415 System Administrator Guide - Manual (Page 24)

I n s t a l l i n g t h e E d i t U t i l i t y
Install the Edit Utility on a computer with the Microsoft
 Windows operating system.
1. Download the Edit Utility from our Web site to your computer.
2. Open the downloaded file and follow the on-screen instructions to complete the
installation.
3. Start the Edit Utility. The Main screen appears.
4. Decide what you want to do next:
 To create a new product data file, see “
Creating a Data File ” for more
information.
 To upload a product data file from the printer to your computer for editing or
backup, see “ Retrieving the Printer’s Data File ” for more information.
 To edit an existing data file, see “
Editing the Data File ” for more information.
 To update the printer’s product data file, see “
Updating with USB ” or “ Updating
with Ethernet ” for more information.
 To update the printer’s application, see “
Updating with USB ” or “ Updating with
Ethernet ” for more information.
S e l e c t i n g a T r a n s f e r M o d e
You can select a transfer mode to transfer files to and from your printer. There are
three options; Auto, Standard, and Streamline. The default setting is Standard.
Standard Mode uses the handshake on port 55555 before sending/receiving files with
TFTP. Streamline mode sends/receives files with TFTP without using the handshake
on port 55555. Auto mode checks the printer for a flag file (lean.txt). If the flag file is
found, Streamline mode is used; if the flag file is not found, Standard mode is used.
To change the Transfer Mode setting:
1. Start the Edit Utility. The Main screen appears.
2. Click on Setup, Network, then use the Transfer Mode drop-down menu to make a
selection.
3. Click OK. ick OK.
3-2 System Administrator’s Guide