Avery Dennison FreshMarx 9415 System Administrator Guide - Manual (Page 33)

6. Press Product Data to update the data files.
The file browser appears.
7. Use the scroll buttons to select the data file and press OK. This may take several
minutes. The USB Update screen indicates when the update is complete.
Press Return. The printer does not restart.
8 . Remove the thumb drive.
9. Press Return until you see the product menu.
T r a n s f e r r i n g F i l e s w i t h E t h e r n e t
You can use an Ethernet connection to transfer your data file from the printer to your
computer and vise versa. To perform updates using Ethernet, the Edit Utility’s IP
address must match the printer’s IP address. Follow these steps to set the IP address
on your printer and computer.
Set the printer’s IP address:
1. Connect the printer to your computer’s Ethernet port.
Note: If you are not connecting through a hub, use a cross-over cable.
2. Press .
3. Enter the Manager Password and press Enter. The default password is 1234. The
Configure screen appears.
4. Press System Settings.
5. Press Network Settings.
The current network settings are displayed.
Updating your printer 4-3