Avalon Firestyles Flush Wood Plus Cypress Face - Manual (Page 3)

Flush Wood Plus Cypress Face Installation
(95600565)
Page 3 of 7 17601651 - Printed 9/18/12 © Travis Industries, Inc.
3. Remove the bypass rod from the fork in the insert, and set aside for later use.
4. Attach the face to the insert by inserting the tabs located on the face into the vertical slots on the surround
panel.
Figure 9: Attaching the face
5. On the left side, connect the Molex connector from the face to the Molex connector on the insert.
Figure 10: Connecting the Molex connectors
6. Tuck excess wires into the cavity near the blower. Make sure they do not contact hot (the bottom of the
firebox) or moving components.
Figure 11: Tuck excess wires