Avalon Firestyles Flush Wood Plus Cypress Face - Manual (Page 2)

Flush Wood Plus Cypress Face Installation
(95600565)
Page 2 of 7 17601651 - Printed 9/18/12 © Travis Industries, Inc.
Installation
1. Lay the face upside down on a non-scratching flat surface. Align the sides with the top of the face and secure
with the 4 nuts. Use a 3/8” wrench to tighten the nuts.
Figure 3: Nut location Figure 4: Tightening a nut
2. Secure the wires to the face using lock-ties. Make sure the wires are secured at all 3 locations. Tighten the
lock-ties and cut off excess tie. Do not over-tighten.
Figure 5: Lock‐tie Figure 6: Securing the lock‐tie
Figure 7: Wires secured with lock‐tie Figure 8: Wires routed