Avalon Firestyles High-Temperature Wood Insert Wiring Kit - Manual (Page 3)

High-Temperature Wood Insert Wiring Kit
97200337
Page 3 of 6 1/31/14 - 17601776 © Travis Industries, Inc.
7 Attach the mounting plate on the wiring harness to the insert with the included screw (5/16” Nutdriver).
8 Route the molex plug through the back of the blower housing and connect to the power input. You may wish
to paint the molex and wiring black to conceal. Make sure all excess wiring is tucked into the area in front of
the blower.
9 The blower may be attached to the insert at this time. Make sure no wiring contacts the squirrel cage on
the side of the blower. Connect power to the blower after the insert is in place.
10 Place the button plug into the exposed whole on the right side of the blower.