Avalon Firestyles 430 GSR2 Traditional Log Set - Manual (Page 6)

430 GSR2 Traditional Log Set
Installation Instructions
(SKU 94500945)
Page 6 of 13 17601790.docx — 7/23/13 © Travis Industries, Inc.
Log and Ember Placement
The logs are fragile, especially after being exposed to heat.
• The burner must be correctly positioned before installing the logs. Make sure the burner is fully seated and screwed
into place.
8. Place the rear log over the rear log support. Note how the two legs on the log rest on the rear burner.
NG Installations
Move the rear log forward until the front edge rests on the tabs on the rear burner.
LP Installations
Move the rear log back until the rests against the back wall. Note how the log is 1/2” from the tabs on the rear burner.