Avalon Firestyles 430 GSR2 Traditional Log Set - Manual (Page 2)

430 GSR2 Traditional Log Set
Installation Instructions
(SKU 94500945)
Page 2 of 13 17601790.docx — 7/23/13 © Travis Industries, Inc.
Preparing the Burner
NOTE: The insert should be in place, with the gas line and vent attached and the firebacks installed (see owner’s manual
for further details).
1. Remove the rear burner.
2. Remove the 3 screws from the back of the rear burner using a ¼” nutdriver.
3. Attach the rear air deflector (NG or LP – see page 1 for details) to the rear burner with the screws removed earlier.
Remove this screw.