Avalon Firestyles Gas/Pellet Remote Thermostat - Manual (Page 6)

Gas/Pellet Remote Thermostat
SKU 99300689
Page 6 of 8 3/7/12 - 17601682 © Travis Industries, Inc.
OPERATING INSTRUCTIONS
NOTE : This kit must be installed by a qualified technician to work correctly
NOTE : On gas appliances the pilot flame must be lit (on standing pilot systems), the gas control valve turned to
"ON", and the on/off switch turned to "OFF" for the remote to work correctly.
NOTE : On pellet stoves the auger must be primed for the remote to work correctly.
NOTE : The remote must be calibrated before it will work (see the instructions on the previous page). If the
remote fails to work, try unplugging the remote receiver, plugging it back in, then re-calibrate the remote.
MODES OF OPERATION:
Manual Mode
Use manual mode to turn the heater on and off directly.
MA
NU
AL
ON/
OFF
AUTO ON/
OFF
TIMER
CLOCK
OFF
°F
AM
SET TEMP
TO TURN ON AND OFF:
Use this key to toggle the
heater on and off. The
display will indicate the
status.
NOTE:
-- If the room exceeds 90°,
the heater will shut off.