Avalon Firestyles 564 SS Gas Installation - Manual (Page 19)

Installation
(for qualified installers only)
1 9
© Travis Industries 4 0 7 0 6 2 0 100-01188_000
Gas Line Location
13-1/2"
6"
13-1/2"
6"
The gas inlet is located 2-1/2"
above the base of the fireplace.
Right Side Gas Inlet (preferred)
Left Side Gas Inlet
A 3" high by 2" wide opening is located
behind the gas inlet cover plate (it is 1-3/4"
above the base of the fireplace).
A 3" high by 2" wide opening is located
behind the gas inlet cover plate (it is 1-3/4"
above the base of the fireplace).
You may remove this cover plate to install the gas line. The
cover plate has a 7/8" diameter hole (covered with a push
plug) in line with the gas inlet on the gas control valve. By
rotating the plate 180° the hole may be re-located. You may
also secure the plate in a customized location using the self-
drilling screws.
You may remove this cover plate to
install the gas line. The cover plate has
a 7/8" diameter hole (covered with a
push plug). By rotating the plate 180°
the hole may be re-located. You may
also secure the plate in a customized
location using the self-drilling screws.
A 12" flex tube and shutoff valve is
included with the fireplace. The
shutoff valve accepts a 1/2"MPT.
A 12" flex tube and shutoff valve is
included with the fireplace (you may
wish to use a 24" flex tube). The
shutoff valve accepts a 1/2" MPT.