Auto-Zone Control Systems Auto-Zone CV & CV-EX Systems Installation & Operation (Version 01C) - Manual (Page 69)

Auto-Zone CV & CV-EX Section 3
Programming 3-25
Wetbulb Setpoints
WB Setpoints
Calibration Offset
Outdoor Air..: 77.1
Cal. Offset..: 0.0
The only setpoint available for this unit is the Calibration
Offset for the Thermistor Outdoor Air Temperature Sensor. If
location or other factors are causing the Outdoor Air
Temperature reading to be incorrect, you can adjust the reading
up or down with this offset. Line 2 shows the current
temperature when you first enter this screen, but it is not
dynamically updated after the offset is changed. You will need
to exit this screen and then return to this screen to see the effect
of the entered offset.
Minimum Default Maximum
Cal. Offset -100.0°F 0.0°F 100.0°F