Auto-Zone Control Systems Auto-Zone CV & CV-EX Systems Installation & Operation (Version 01C) - Manual (Page 66)

Section 3 Auto-Zone CV & CV-EX
3-22 Programming
CV Controller
Scheduling and Holidays
The Constant Volume AHU controllers contain their own built-in scheduling capability
for calculating Occupied/Unoccupied periods. All schedules are entered in 24-Hour
Military Format.
See the Constant Volume Menu Operations Screen for information on how to access
these programming functions.
Scheduling/Holiday Menu
Week Schedules
Start Time
Stop Time
Note: The second line displays which day of the week is currently being
programmed. This automatically increments as you finish the Stop Time
and continues to the next Start Time screen.
Constant Volume Unit
1) Week Schedules
2) Holidays
MENU) Previous Menu
This menu appears whenever you access the Scheduling
functions. It allows you to choose between schedules or
holidays.
WEEK SCHEDULES
Sunday Start Time
Value Hrs/Mins: 0
(MILITARY FORMAT)
The screens will step through the Start Time and then the Stop
Time for each day of the week. You can quit at any point in the
process by pressing the "A" key.
All times are in 24-hour format, so 5:00 PM would be entered
as 1700.
If both the Start and Stop Times are ZERO, the schedule is in a
Continuous OFF mode.
If both the Start and Stop Times are 2359, the schedule is in a
Continuous ON mode.
WEEK SCHEDULES
Sunday Stop Time
Value Hrs/Mins: 0
(MILITARY FORMAT)