Auto-Zone Control Systems Auto-Zone CV & CV-EX Systems Installation & Operation (Version 01C) - Manual (Page 51)

Auto-Zone CV & CV-EX Section 3
Programming 3-7
Programming Date
Daylight
Savings Adjustments
Program Time/Date
Month (1-12): 3
Day (1-31): 20
Year (00-99): 09
Month
- Enter the Month (1 to 12)
Day
- Enter the Day of the Month
(1 to 31)
Year - Enter the current Year with 2 digits
(00 to 99)
If your area of the country requires Daylight Savings changes,
you can enable the System Manager to automatically reset its
own clock during the Daylight Savings changeover. However,
if you enable this operation, be aware it will changeover the
first Sunday in April and then switch back the last Sunday in
October. These used to be the standard dates every year that
were constant from year to year.
The U.S. government has seen fit recently to arbitrarily
determine the switch over dates each year so it is
recommended that you disable this function and manually
change the schedules from year to year.
Use the Left or Right arrow keys to toggle the second line of
the display between Adjustments Enabled and Adjustments
Disabled.
Daylight Savings
Adjustments Enabled
Use Left/Right Arrow