Audio Enhancement Product Manual - Manual (Page 22)

22
Charging the
Microphone Battery
Position the teardrop microphone with the black
back of the microphone facing towards you .
Align the charger connector so that the small
triangle arrow on the charging connector is facing
you .
Insert the connector to the microphone .
Position the handheld microphone with the 3 .3 V
label above the charging connector .
Align the charger connector so that the small
triangle shaped arrow on the charging connector is
facing you .
Insert the connector to the microphone .
Align Arrow
Facing Up
Align Arrow
Facing Up
1 . Plug the charger into the wall to the AC mains .
2 . Connect the charging plug(s) to the microphone(s) as indicated above .
3 . The red charging LED should come on and stay on during the charging process . It will
extinguish when charging is complete .
4 . A flashing red charging LED indicates a charging problem . It will flash if an attempt is
made to charge an Alkaline battery .