Artesyn System Services Framework Installation and Use (November 2014) - Manual (Page 59)

SSF Configuration
System Services Framework Installation and Use (6806800S58E) 59
4.3 Blade SSF Core Configuration
Blade SSF core consists of SSF-BCSIM (ssfbcsimd) executable configuration files. These files
are located at /opt/ssf/etc/config/bcsim/. The following table provides the list of
configuration files of ssfbcsimd and their config options.
4.3.1 Service Manger (SMAN) Configuration
In the SMAN configuration file SMAN.conf, you can add the additional user defined
services. The SMAN.conf file is located at /opt/ssf/etc/config/bcsim/.
Table 4-2 Blade SSF Core Configuration files
File Name Config Options Description
ssfApi.conf transport
emindTcpAddress
healthcheckPeriod
logEnabled
logLevel
logFile
You can edit the Transport Layer protocol
(TCP/UDP), server IP address, healthcheckPeriod,
and log settings.
Set the IP address of emindTcpAddress with the
IP address of SSF core.
healthcheckPeriod
is in seconds, checks the
health of the link between CSIM core and SSF.
In the log settings, you can disable or enable the
log, set the log level and the log file name.
SMAN.conf
Default configurations
are provided such as:
syslog-ng
ntpd
dhcpd
sshd
vsftpd
tftpd
named
syslcu
In addition to default configuration files you can
add user defined services. For more information
refer the SMAN.conf file.