Artesyn System Services Framework Installation and Use (November 2014) - Manual (Page 35)

SSF Installation
System Services Framework Installation and Use (6806800S58E) 35
In the RPM command above, the string should be replaced with the
application agent of the application, which has to be accessed using SSF. The strings ,
and should be replaced with the blade name on which application is installed and
with version number of the SSF respectively. For example, in order to access ViewCheck
installed on ATCA-7370 blade, then the RPM is:
rpm -ivh ssf_diagnosticsTLS_rel-7370-1.0.19.x86_64.rpm
After the installation, all SSF application agent binary and configuration files are installed on
the blade at the /opt/ssf location.
3.2.6 Starting SSF
It starts automatically once you restart the system. This section describes methods to start the
SSF application manually, followed by sections for starting the Web Interface, SSF Core, Blade
SSF Core, and Application agent individually.
3.2.6.1 Starting SSF Core
You can start the SSF Core using the RC scripts. Execute the S98startPostgre.sh,
S99SsfRun.sh
scripts with start command to start SSF Core. This scripts initiates
the SSF core.
Table 3-4 Directory Structure of SSF Application Agent
Folder Description Files
/opt/ssf/bin
This folder contains binaries of SSF
Application Agent.
ssf
.
For example, ssfsrsd is the
application agent for
SRStackware.
/opt/ssf/etc/con
fig/
Agent>/
This folder contains application agent
configuration files, if any application
is installed on the blade. For more
information, see
SSF Application Agent
Configuration on page 65 .
S99Ssf
>.sh
ssfApi.log
ssfApi.conf
ssf__
instances