Artesyn RTM-ATCA-736x-DD Installation and Use (June 2014) - Manual (Page 60)

IPMI Functions List
RTM-ATCA-736X-DD Installation and Use (6806800L82C) 60
5.4 Supported IPMI Commands
The MMC communicates with the carrier controller through the local IPMB-L bus of the carrier
and responds to all mandatory commands for AMC Module Management Controllers, as well
as some optional ones.
Table 5-4 Supported IPMI Commands
Command
IPMI/PICMG
/AMC Spec
NetFn CMD MMC Req
IPM Device "Global" Commands
Get Device ID 17.1 App 01h Mandatory
Broadcast "Get Device ID" 17.9 App 01h Mandatory
Messaging Commands
Send Message 18.7 App 34 h Optional
Event Commands
Platform Event 23.3 S/E 02 h Mandatory
Sensor Device Commands
Get Device SDR Info 29.2 S/E 20 h Mandatory
Get Device SDR 29.3 S/E 21 h Mandatory
Reserve Device SDR Repository 29.4 S/E 22 h Mandatory
Get Sensor Reading Factors 29.5 S/E 23 h Optional
Set Sensor Hysteresis 29.6 S/E 24 h Optional
Get Sensor Hysteresis 29.7 S/E 25 h Optional
Set Sensor Threshold 29.8 S/E 26 h Optional
Get Sensor Threshold 29.9 S/E 27 h Optional
Set Sensor Event Enable 29.10 S/E 28 h Optional
Get Sensor Event Enable 29.11 S/E 29 h Optional
Rearm Sensor Events 29.12 S/E 2A h Optional
Get Sensor Event Status 29.13 S/E 2B h Optional
Get Sensor Reading 29.14 S/E 2D h Mandatory
FRU Device Commands