Artesyn RTM-ATCA-736x-DD Installation and Use (June 2014) - Manual (Page 46)

Mechanical and Connector Information
RTM-ATCA-736X-DD Installation and Use (6806800L82C) 46
4.1.4 Environmental Specifications and Compliance
The environmental specifications for the RTM-ATCA-736X-DD assembly are presented in the
table below.
Table 4-2 Environmental Specifications for the RTM-ATCA-736X-DD
Specification
RTM with rotating SAS Disk Media
Installed
RTM without Disks
Operating Voltage +12V +/- 5% (payload power) +12V +/- 5% (payload power)
Operating Temperature (normal) +5°C to +40°C +0°C to +49°C
Operating Temperature (short term) -5°C to +55°C (Consult disk drive
manufacturer for warranty
implications)
+0°C to 70°C
Storage Temperature -40 °C to 70°C -40 °C to 100°C
Operating Temperature Gradient 11°C /H (max) 11°C /H (max)
Storage Temperature Gradient 20°C /H (max) 20°C /H (max)
Shipping Temperature Gradient 20°C /H (max) *1 20°C /H (max)
Operating Humidity 5% to 85% (non condensing) 5% to 90% (non condensing)
Storage Humidity 5% to 90% (non condensing) 5% to 90% (non condensing)
Shipping Humidity 5% to 90% (non condensing) No condensation
Condensation No condensation No condensation
Altitude, operating (relative to sea
level) -305 to +3,048 m (-1000 to +10,000
feet) (-1000 to +40,000 feet)
Altitude, non-operating (relative to
sea level) -305 to +12,192 m (-1000 to
+40,000 feet) (-1000 to +40,000 feet)
Shock, operating 980 m/s2 (100G) / 1 ms duration 500G / 0.5msec duration
Shock, non-operating 3,920 m/s2 (400G) / 1 ms duration 1000G / 0.5msec duration
Vibration, operating 0.6 mm (5 to 20Hz) / 9.8 m/s2 (1G)
(20 to 300Hz) or less Note: At
random seek write/read and default
on retry setting with log sweep
vibration. 2.17 GRMS (5-700Hz)