Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 49)

Controls, LEDs, and Connectors
VXS1-RTM1 Installation and Use (6806800P46C) 49
3.1.3.2 RTM FRU EEPROM
The RTM provides a 2Kb serial EEPROM containing FRU configuration information specific to
the RTM. Typical information that may be present in the EEPROM include: manufacturer, board
revision, build version, date of assembly etc. The RTM FRU EEPROM device address is user
selectable through the switch with the default address of 0x57. Refer to the EEPROM datasheet
for additional details and/or programming information.
SW5 SW1_CPLD Reserved
SW4 I2C_WP Write protect RTM VPD
EEPROM Allow to write RM VPD
EEPROM
SW3 I2C_ADDR0 RTM VPD EEPROM Address A0, ON=0, OFF=1
SW2 I2C_ADDR1 RTM VPD EEPROM Address A1, ON=0, OFF=1
SW1 I2C_ADDR2 RTM VPD EEPROM Address A2, ON=0, OFF=1
Table 3-18 RTM Configuration Switch (S1) (continued)
Pin Name Signal Name ON OFF