Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 41)

Controls, LEDs, and Connectors
VXS1-RTM1 Installation and Use (6806800P46C) 41
3.1.2.2.7 RTM Serial Port 4 Connector P4
The RTM provides one planar header for COM port 4. The pin assignment for this connector is
as follows:
3.1.2.2.8 RTM USB 1 and USB 2 Connector J4
The RTM provides one standard dual stacked USB port 1 and 2 type A connector on its front
panel. Both ports provide USB 3.0 capability and backward compatible with USB 2.0. The pin
assignment for this connector is as follows:
9 NC
10 NC
Table 3-8 RTM COM 3 Header (P3) (continued)
Pin Name Signal Name
Table 3-9 RTM COM 4 Header (P4)
Pin Name Signal Name
1 NC
2 COM4_RX_CTS_P
3 COM4_TX_RTS_P
4 NC
5 GND
6 NC
7 COM4_TX_RTS_N
8 COM4_RX_CTS_N
9 NC
10 NC
Table 3-10 RTM Dual USB 1 and 2 Connector (J4)
Pin Name Signal Name
1 USB1_+5V