Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 23)

Chapter 1
VXS1-RTM1 Installation and Use (6806800P46C) 23
Introduction
The VXS1-RTM1 is a rear transition module designed to provide I/O expansion of a VME board
through the VME P2 connector and/or the VXS P0 connector. This document describes the
features and functions of the RTM and provides the procedure for hardware preparation and
installation.
1.1 Features
The main features of VXS1-RTM1are as follows:
 One Display Port with mini DP connector to RTM panel.
 Four serial ports to RTM, two on micro DB9 connectors on RTM panel and two on planar
headers.
 Two 10/100/1000BASE-T Ethernet channels to RJ45 connectors on RTM panel
 Two USB3.0 ports to RTM with USB type A connectors on RTM panel (one USB3.0 port is
muxed with ESATA port).
 Two ESATA ports to RTM with ESATA connectors on RTM panel (one ESATA port is muxed
with USB3.0 port).
 Four GPIOs to planar headers on RTM.
1.2 Standard Compliances
The VXS1-RTM1 is designed to be CE compliant and to meet the following standard
requirements.
Table 1-1 Board Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-
1 Safety Requirements (legal)