Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 26)

Hardware Preparation and Installation
VXS1-RTM1 Installation and Use (6806800P46C) 26
2. Check your shipment and report any damage or differences to the contact center at
[email protected] .
3. Remove the desiccant bag shipped together with the RTM and dispose of it according to
your country’s legislation.
2.2 Requirements
Make sure that the board, when operated in your particular system configuration, meets the
requirements specified in the following sections.
2.2.1 Environmental Requirements
The following table lists the currently available specifications for the environmental
characteristics of the VXS1-RTM1. A complete functional description of the VXS1-RTM1
baseboard appears in
Chapter 4, Functional Description .
The RTM is thoroughly inspected before shipment. If any damage occurred during transportation
or any items are missing, contact customer service immediately.
Operating temperatures refer to the temperature of the air circulating around the board and not
to the component temperature.
Table 2-1 VXS1-RTM1 Specifications
Characteristics Value
Cooling Method Forced Air
Operating temperature 0°C to +55°C
Storage Temperature -40°C to +85°C