Artesyn MVME7100ET Single Board Computer Installation and Use (June 2014) - Manual (Page 126)

MVME7100ET Single Board Computer Installation and Use (6806800K87E)
Safety Notes
126
Battery
Board/System Damage
Incorrect exchange of lithium batteries can result in a hazardous explosion. When exchanging
the on-board lithium battery, make sure that the new and the old battery are from exactly the
same battery manufacturer and of the same models. If the respective battery model is not
available, contact your local Artesyn sales representative for the availability of alternative,
officially approved battery models.
Data Loss
Exchanging the battery can result in loss of time settings. Backup power prevents the loss of
data during exchange.
Quickly replacing the battery may save time settings.
Data Loss
If the battery has low or insufficient power the RTC is initialized.
Exchange the battery before seven years of actual battery use have elapsed.
PCB and Battery Holder Damage
Removing the battery with a screw driver may damage the PCB or the battery holder. To
prevent damage, do not use a screw driver to remove the battery from its holder.