Table 5-19, Serial port 1/2/3/4/5/6 configuration, Bios – Artesyn COMX-CORE Series Installation and Use (August 2014) User Manual
Page 90
BIOS
COMX-CORE Series Installation and Use (6806800K11F)
90
Serial Port 4 Configuration
Set Parameters of Serial Port 4 (COMD), see
Serial Port 5 Configuration
Set Parameters of Serial Port 5 (COME), see
Serial Port 6 Configuration
Set Parameters of Serial Port 6 (COMF), see
Parallel Port Configuration
Set Parameters of Parallel Port (LPT/LPTE), see
Watchdog Timer Configuration
Set parameters of Watchdog Timer (WDT), see
Intrusion Detect
Select state for Intrusion Detect
Default is Disabled
Table 5-19 Serial Port 1/2/3/4/5/6 Configuration
Field
Description
Serial Port
Enable/Disable Serial Port
Default is Enabled
Device Settings
Current settings: IO=3F8; IRQ=4;
1
Change Settings
Select an optimal setting for Super IO Device
Options:
Auto
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3,4,5,6,7,10,11,12;
IO=2F8h; IRQ=3,4,5,6,7,10,11,12;
IO=3E8h; IRQ=3,4,5,6,7,10,11,12;
IO=2E8h; IRQ=3,4,5,6,7,10,11,12;
Default is Auto.
1. IO address shall be assigned responding to various Serial Ports. For example, IO=2F8; IRQ=3 for COMB, IO=3E8;
IRQ=7 for COMC, IO=2E8; IRQ=7 for COMD, IO=2E0; IRQ=10 for COME, IO=2F0; IRQ=10 for COMF.
Table 5-18 Super IO Configuration (continued)
Field
Description