Artesyn COMX-CORE Series Installation and Use (August 2014) - Manual (Page 17)

Chapter 1
COMX-CORE Series Installation and Use (6806800K11F) 17
Introduction
1.1 Features
COMX-CORE Series is a COM Express module based on the Intel Calpella platform (Arrandale
ECC processor plus Ibex Peak-M). COM Express is an industry-standard embedded computer
module defined by PICMG.
COMX-CORE Series provides the following interfaces: VGA interface, dual-channels LVDS
display interface, 3x Digital Display interfaces, 4x SATA-II, 1x GbE interface, 8 x1 PCI Express,
16x PEG, 8x USB 2.0, 1x HDA interface,; 1x SM bus, and 1x SPI interface. This module also
provides up to 8 GB DDR3 Non-ECC 1066 MHz onboard memory, a 4 GB USB flash that is used
to store the OS, boot applications, and provides two 4Mb SPI flash.
The following tables summarize the features of COMX-CORE-312/512 (ECC) and COMX-CORE-
510/710/750 (non-ECC)
Table 1-1 COMX-CORE-312/512 (ECC) Features Summary
Function Features
Processor/ Memory Controller  Arrandale+ECC Processor
–
Multi-chip package
– Integrated Graphics and Memory Controller Hub
(GMCH)
– 2 MB or 3 MB integrated L3 cache
– Core frequency
- COMX-CORE-312 1.86GHz (P4505)
- COMX-CORE-512 2.4GHz (i5-520E)
 Ibex Peak-M Platform Controller Hub (PCH)
–
Intel Calpella HM55 Platform Controller Hub for
COMX-CORE-312
– Intel Calpella QM57 Platform Controller Hub for
COMX-CORE-512
BIOS Device Two 4 MB SPI flash
Memory  Supports two DDR3 800/1066 64-bit SO-DIMM
sockets.
Maximum capacity is 8 GB ECC memory.
eUSB Flash Optional 1 GB low profile eUSB flash