Artesyn COMX-CORE Series Installation and Use (August 2014) - Manual (Page 29)

Chapter 2
COMX-CORE Series Installation and Use (6806800K11F) 29
Hardware Preparation and Installation
2.1 Environmental and Power Requirements
2.1.1 Environmental Requirements
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the system outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying power.
Table 2-1 Environmental Requirements
Requirement Operating Non-Operating
Cooling Method Forced-Air
Temp Cycle Class -40°C–85°C:500cyc
Temperature 0°C–55°C -40 °C - 85 °C
Humidity 10 -90% Non-condensing -
Vibration 0.01g ^2/Hz at 5-500 Hz
Random Vibration
Shock 20 g 11 ms sine or saw -
Altitude -60–4000 m ASL