Artesyn COMX-CORE Series Installation and Use (August 2014) - Manual (Page 88)

BIOS
COMX-CORE Series Installation and Use (6806800K11F) 88
Table 5-12 Thermal Configuration
Field Description
CPU Thermal Configuration CPU thermal configuration, see CPU Thermal Configuration
Table 5-13 CPU Thermal Configuration
Field Description
TM1 Enable/Disable Thermal Monitor1; Default is Enabled
TM2 Enable/Disable Thermal Monitor2; Default is Enabled
ACPI 3.0 T-States Enable/Disable ACPI 3.0 T-States ;Default is Disabled
Table 5-14 Port 80h
Field Description
Port 80h Redirection Control where the Port 80h cycles are sent: PCI bus, LPC bus
Default is LPC bus
Table 5-15 USB Configuration
Field Description
USB Devices List the USB Devices attached.
Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if
no USB devices are connected. DISABLE option will keep USB devices
available only for EFI applications.
Default is Enabled.
Device Reset Timeout USB mass storage device Start Unit command timeout
Items: 10 sec,20 sec,30 sec,40 sec
Default is 20 sec.
Table 5-16 AMT Configuration
Field Description
Intel AMT Enable/Disable Intel Active Management Technology BIOS Extension
Default is Enabled.