Argox PA-20 Programming Guide - Manual (Page 13)

PT-20 Programming Guide 11
Upgrade System
1. System Requirement:
Software: PT-FileManager
Hardware: PA-20 / PA-2010 / PA-21 / PA-2110 and PC.
Firmware: Binary file generated by RealView compiler (App.bin) or Upgrade fw(in
Upgrade folder)
2. Upgrade Procedure:
In Force Mode:
When reset PA-20 / PA-2010 / PA-21 / PA-2110, press combine key
“1+3+PW+reset“ any time or press combine key “1+3+PW” in power off to into Force
Mode.
Then connect the Cradle to the PC and wait for communication.
In Supervisor Menu:
When reset PA-20 / PA-2010 / PA-21 / PA-2110, press combine key
“1+3+0+PW+reset“ any time or press combine key “1+3+0+PW” in power off to into
Supervisor Menu.