Section 4 connections and applications, 1 local sense connections, Connections and applications – AMETEK SLH Series RevC User Manual

Page 55: Local sense connections

Text mode
Original mode

SECTION 4

CONNECTIONS AND APPLICATIONS

4.1

LOCAL SENSE CONNECTIONS

Figure 4-1 illustrates a typical set up with the electronic load connected to the DC power supply.
Local sensing is used in application where lead lengths are relatively short, or where load
regulation is not critical. The 4½-digit volt Meter of SLH-series DC electronic load measures the
voltage of DC INPUT Terminal automatically; load leads should be bundled or tie-wrapped
together to minimize inductance.

Figure 4-1 Local Voltage Sense Connections

M540074-01

Rev C

4-1