Cooling -10, Power in connections -10, Figure 3-6. input power connections -10 – AMETEK CW-M User Manual

Page 26: 4 cooling, 5 power in connections

Text mode
Original mode

Elgar CW-M Series

3-10

M161570-01

3.4 COOLING

The CW unit employs internal fans to circulate cooling air. The air is drawn
into the chassis along its sides, and is exhausted through the rear panel.
For maximum product life and reliability, do not allow the airflow to be
impeded.

CAUTION! Avoid blocking the instrument air
intakes or exhaust.

3.5 POWER IN CONNECTIONS

Connect input power to the INPUT terminal block on the rear panel as
specified below. Refer to Figure 3-6.

Figure 3-6. Input Power Connections

WARNING!

For input voltages >120V, do not reverse LINE and NEUT.

Reversed connections will result in pulsing noises from the supply.