Specifications -1, Output -1, Specifications – AMETEK CW-M User Manual

Page 11: 1 output

M161570-01

2-1

SECTION 2

SPECIFICATIONS

Note: Product specifications are subject to change without notice.

2.1 OUTPUT

Power

CW 801M: 800 VA

CW 1251M: 1250 VA

CW 2501M: 2500 VA

Power Factor of Load: 0 lag to 0 lead

Phase: All models single phase output

Voltage

Ranges: 0 to 135 VAC RMS or 0 to 270 VAC RMS manual switch

(consult factory for custom output voltages)

Accuracy: 1% of range for voltages >5V

Resolution: 0.1V

Total Harmonic Distortion: 0.65% maximum up to 60 Hz;

add 0.05%/10 Hz from

60 Hz to 100 Hz; add 0.4%/100 Hz from >100 Hz

AC Noise Level: <50m VRMS typical for CW 801M and CW 1251M,

100m VRMS typical for CW 2501M

Amplitude Stability: ±0.1% of full scale over 8 hours at constant line,

load and temperature after 15 minute warm-up