AGI Security SYS-HD0420A - Manual (Page 53)

53 | P a g e
5. PTZ Control
To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the item you
wish to control the PTZ camera and control them using the mouse or the control button on the remote control.
Please refer to the table 5.1. for the control.
Figure 5.1. PTZ
Control Screen
Table 5.1. Button Functions in PTZ Control
Item Description
INITIALIZE Initialize the PTZ settings of the selected camera.
PAN / TILT
Select PAN/TILT using the mouse or the control button and press SEL
button on the remote control.
Adjust the tilt (UP/DOWN) / pan (LEFT/RIGHT) position using the
mouse or the control button on the remote control.
ZOOM /
FOCUS
Select ZOOM/FOCUS using the mouse or the control button and press
SEL button on the remote control.
Adjust the zoom (Mouse Wheel Down or Up/Down button of the
remote control)/focus (Mouse Wheel Up or Left/Right button of the
remote control) position.
OSD Select the OSD to enter the menu. Control keys are Right, Left, UP,
Down, Select, Far (REW KEY), and Near (FF KEY). Press the …………..
button to return to the main menu. Press the PTZ button to escape
from the OSD menu.
AUTOSCAN Press the right key (▶) on the control button to start auto scan
Press the left key (◀) on the control button to stop auto scan.
PRESET Select the PRESET and press the left key (◀) on the control button.
Then, number input window will appear. Set the number (3 digits)
using the number key and press the SEL to set the preset number for
the current position.
Press the right key (▶) on the control button and set the number (3
digits) to go to the preset number.
TOUR Select the TOUR and press the right key (▶) on the control button.
Then, number input window will appear. Set the number (1 digit) using
the number key and press SEL to make the group number work.
Press the left key (◀) on the control button to stop tour.
User can set the preset number in the tour group of the OSD menu.
NUMBER Available only on the TOUR and PRESET menu.
Press the ESC button to return to the main menu.
 Preset/ Tour/ OSD/ Auto-scan function are available on the specific model AP8777 and PMA-200. (Select it
in the NAME of PTZ setup menu)