3. booting the dvr and basic time setting, 4. setting daylight saving time, The default password is “1111 – AGI Security SYS-HD0420A User Manual
Page 18
18 |
P a g e
2-3. Booting the DVR and Basic Time Setting
1. During the first start up, the following message will be displayed.
2. After the system initializing is completed, select the language and set date and time as specified below.
2-4. Setting Daylight Saving Time
If the DVR is to be set Day Light Saving Time and be synchronized NTP (Network Time Protocol), take next steps.
1.
Click a mouse-right button or SETUP button on the front panel of DVR to enter the SETUP mode.
The default Password is “1111”.
2. Go to SETUP>SYSTEM>SET DATE & TIME
This manual is related to the following products: