AGI Security SYS-HD0420A - Manual (Page 30)

30 | P a g e
3-4-1. ALARM-OUT
Figure 3.4.2. ALARM-OUT Setup Screen
Table 3.4.2. Menu Item in ALARM-OUT Setup Screen
Item Description
ALARM OUT Select an Alarm out number.
SENSOR IN Enable Alarm Out by Sensor up to 16 Inputs.
MOTION ON Enable Alarm Out by Camera Motion up to 16 cameras.
VIDEO LOSS ON Enable Alarm Out by Video Loss up to 16 cameras.
ALARM DURATION Set the alarm dwell time from 5 to 60 seconds.
ERROR ALARM Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
3-4-2 CONTROLLER & PTZ Setup
To control the PTZ functions of the camera or to control the DVR using the controller, connect a controller to the RS-
485 port.
Connect the RS-485 cables of the PTZ camera to the RS-485 port on the rear panel.