AGI Security SYS-HD0420A - Manual (Page 34)

34 | P a g e
S.M.A.R.T Set the alarm and beep by setting HDD temperature limit.
3-6. Setup – System Mode
In the SETUP menu, select the SYSTEM tab . Then, the SYSTEM menu is displayed as pictured below. Navigate
through the menu items using the mouse or the control button on the remote control and change the value of the
menu item.
Figure 3.6.1. SYSTEM Setup Screen
Table 3.6.1. Menu Items in SYSTEM Setup Screen
Item Description
DVR ID Set DVR ID using the mouse or the control button on the remote control. Press OK to apply
the DVR ID.
DESCRIPTION Press the button to view the system information.
Model name, Software version, Storage size, IP address, MAC address, and DDNS status.