Adtec digital EN-91 / EN-91P (version 1.02.29) Manual - Manual (Page 33)

Trap sink The Simple Network
Management Protocol (SNMP)
trap sink. Default Value:
"127.0.0.1"
Enter the IP address of your SMNP trap
sink server.
Com2
Item Function Options
Com2 Settings RS-232 terminal monitor for
communicating with the
internal host motherboard for
diagnostics.
115200 8 1 NONE
57600 8 1 NONE
38400 8 1 NONE
19200 8 1 NONE
9600 8 1 NONE
Default is 38400 8 1 None
Feature Sub Menu
Item Function Options
Permanent ID This is one of the unique IDs
for your unit. This number
along with your serial number
are used to generate
permanent feature keys.
read only value
Temporary ID This is the other unique ID. It
along with the permanente ID,
and serial number are used to
generate temporary feature
keys.
read only value
Key status Depending on what keys you
have and if they are temp or
permanent they will be listed
here.
read only values with countdown for
temp keys.
Name
Item Function Options
Name Displays and allows editing of
the units name. This becomes
the units host name for
networking purposes.
Enter Ascii characters.
Firmware