Adtec digital EN-91 / EN-91P (version 1.02.29) Manual - Manual (Page 20)

the rear of the unit) to use for
multicast transmit purposes on
the indicated encode channel.
GigE
Video Menu
Item Function Options
Input Allows the operator to select which
input the video will be sourced
from.
SDI
COMPOSITE
OPTICAL* EN-91P Only
SDI Mode Allows the operator to force the
SDI receiver into a specified mode.
AUTO
SD
HD1.4G
HD3G* EN-91P Only
Entropy
Coding Allows the operator to set the
entropy coding settings
*** H.264 encoding only, Auto
mode will use CABAC at video
bitrates <= 30Mbits/sec and
CAVLC at rates > 30Mbits/sec.
CABAC
CAVLC
AUTO
Chroma Allows the operator to set the
encoder chroma type. 420
422
Video Rate The rate at which video is being
encoded. Video bitrate changes are
not dynamic. They take effect at
the start of the next encode
session.
user-defined using the numeric
keypad
If video autofill is enabled, this
value will change based on other
variables.
Review Technical Specifications for
full details on acceptable ranges.
Autofill When Video AutoFill is turned ON,
the encoder will calculate and use
the max video bitrate for the
current TransMuxRate setting. This
is recommended. If Autofill is set
to OFF the encoder will use the
manual setting for the video
bitrate.
ON
OFF