Adtec digital EN-91 / EN-91P (version 1.02.29) Manual - Manual (Page 15)

RF Tx Menu
Item Function Options
Transmit Allows the operator to enable or disable
the Main RF output. If Transmit is enabled
and any value for Type, Frequency,
Rolloff, Symbol Rate, or Interface Rate is
changed, then Transmit will be
automatically disabled. However, the
monitor output will remain active.
Disable
Enable
Type Allows the selection of the mod type. DVBS
DVBS-2
Mode This control allows the operator to select
the desired modulation mode and FEC
code rate.
We display all possible ranges
available via our device in the
Front Panel. This list will differ
from the list found in the web
UI as it only shows those
options available based on the
feature keys found.
QPSK-1/2
QPSK-2/3
QPSK-3/4
QPSK-5/6
QPSK-6/7
QPSK-7/8
QPSK-1/4
QPSK-1/3
QPSK-2/5
QPSK-3/5
QPSK-4/5
QPSK-8/9
QPSK-9/10
8PSK-3/5
8PSK-2/3
8PSK-3/4
8PSK-5/6
8PSK-8/9
8PSK-9/10
16QAM-3/4
16QAM-7/8
16APSK-2/3
16APSK-3/4
16APSK-4/5
16APSK-5/6
16APSK-8/9
16APSK-9/10
32APSK-3/4
32APSK-4/5
32APSK-5/6
32APSK-8/9
32APSK-9/10
Local
Oscillator This field should contain the frequency of
your external BUC.
It is provided for convenience purposes
only and to aid in the automatic
calculation of the Modulator frequency.
The actual required setting will depend on
your external hardware (Block
Upconverter), and may differ from the
value set here. If so, please update.
This field may only be changed
if Tx is DISABLED.