Zilog Z86E07 - Manual (Page 27)

4-1
C50 ICEBOX
U SER ' S M ANUAL
C
HAPTER
4
S UMMARY OF M ENUS , C OMMANDS ,
AND O PERATIONS
U SER ' S M ANUAL
MAIN MENU
ICEBOX Configuration File Help
The Main Menu window of the emulator graphical user interface (GUI) is displayed after
the GUI program is started. The following menu items can be accessed from this Main
Menu:
■ ICEBOX Menu
■ Configuration Dialog Box
■ File Menu
■ Help
Each of these Main Menu items, along with all windows, subset menus, menu items,
commands, and operations, are summarized in the following sections of this chapter.
CONFIGURATION DIALOG BOX
At start-up, the emulator GUI automatically detects which emulator is in use. (The user,
however, can overwrite this by using a command-line option.) When a configuration dialog
box is shown on the screen, you can choose the microcontroller and the ROM size you want
to emulate. The code file you download to Code Memory is limited to the ROM size
selected. Selected ports automatically reference port availability in the selected microcon-
troller. Other information about the microcontroller, such as the number of ports and
extended register banks, can be observed but cannot be altered. Click the OK or CANCEL
button to confirm or cancel the configuration.
Note: To modify the configuration, you must first close all open windows; the configuration
command then reappears in the Main Menu.
FILE MENU
File-related commands are grouped under this menu. These commands are briefly
described below.
Download To Z8 Code Memory: download a piece of Intel hexadecimal (hex) or binary
format code to Code Memory (Note that when down-
loading a hex file, the file size showing in the file
downloading dialog box is the size of the memory the
downloaded file will occupy, not the actual file size.)
UM009701-0201