Zilog Z86C36 - Manual (Page 38)

Z86C36
ICEBOX
UM002201-0301 Overview
26
13. Ensure that Emulator is selected in the Module field.
14. Select the port the ICEBOX is connected to from the Port pop-up list.
15. Select 57600 from the Baud Rate pop-up list.
16. Click OK to close and apply the Emulator Configuration options.
17. Select Save Project from the File menu to save the emulator
configuration setting.
Open a Project and Add Files
A previously created project has the following attributes saved with it:
•
Target settings
•
Assembler and Linker settings for the specified target
•
Source files (including header files)
Use the Project Viewer window to view and access the various
files in any given project.
Perform the following steps to open a previously created project:
1. Select Open Project from the File menu. The Open Project dialog box
appears.
2. In the Open Project dialog box, select the previously created project.
The project appears in the Project Viewer window, as shown in
Figure 8.
Note: