Zilog Z86C36 - Manual (Page 11)

Z86C36
ICEBOX
Preface UM002202-1001
xi
Follow the precautions listed below to avoid permanent damage to the
emulator.
1. Always use a grounding strap to prevent damage resulting from
electrostatic discharge (ESD).
2. Power-Up Precautions.
a. Ensure that all power to the emulator and the target application (if
any) is turned OFF.
b. Connect the target pod to the target application (if any).
c. Power up the emulator, then press the RESET button.
d. Power up the target application (if any).
3. Power-Down Precautions.
When powering down, follow this procedure in the precise order
shown below:
a. Halt emulation.
b. In ZDS select Reset from the Build or Debug Menu.
c. Power down the target application board (if any).
d. Remove the target pod.
e. Power down the emulator.
Electrical Safeguards