2 set up and operate in smart matrix – Xtramus NuWIN V1.1 User Manual

Page 89

Website: www.

tramus.com

XTRAMUS TECHNOLOGIES

4.9.4.2 Set up and Operate in Smart Matrix

Trasmit Header Operation in Smart Matrix is similar to the operation in Transmit Setup.

Only the setting steps between these two are slightly different. The protocol parameters

are divided into 2 groups: DA/ SA and TxUDF 1～TxUDF 4.

Part 1. Simple DA and SA settings

Step 1. Click right mouse on desired port to select Set up Smart Matrix to bring out the

window. Choose the desired packet to check DA and SA in TxUDF to activate.

Check the box(es) to enable all TxUDF parmeters at once.