Xtramus NuWIN V1.1 User Manual
Page 63

58
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.9.1.2 Mode
Choose DA/SA/DIP/SIP mode setting for user-defined packets through Mode selection
of each dialogue.
1. Fixed stands for fixed (constant) pattern of all transmitted packets.
(000000000001, 000000000001, 000000000001…)
2. Increase stands for packets transmitted with incrementally increased value.
(000000000001, 000000000002, 000000000003…)
3. Decrease stands for packets transmitted with decrementally decreased value.
(000000000003, 000000000002, 000000000001…)
4. Random stands for packets transmitted with random value.
(000000000001, 000000000003, 000000000002…)
4.9.1.3 Loop
Loop Count indicates the number of transmitted packets in a loop, and Loop Step
indicates the difference between every transmitted packet in the loop. Loop Count and
Loop Step can be enabled for Increase and Decrease mode of DA/SA value setting.
Please note that for the Increase and Decrease mode of DIP/SIP setting, Loop Step
setting is not enabled.