Xtramus NuWIN V1.1 User Manual
Page 165

160
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.21.6.2 Card Version (Chassis)
Choose Card Version (Chassis) to receive information of every module card inserted
in the chassis.
4.21.6.3 Update Firmware
In the process of updating FW, SYS LED may be flashing due to power shortage,
unstable voltage, jammed network, or defective hub or switch. The lights will go out
when FW is successfully updated. Close the NuWIN and then shut down the chassis
after Firmware update. Follow the procedures below to solve the issue.
Choose Update Firmware to open Preference window. Download the latest firmware
and FPGA or to enhance Log Window information.