6 multiple users – Xtramus NuWIN V1.1 User Manual
Page 37

32
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
2.2.6 Multiple Users
1. Find a PC with 2 Network Interface Cards (NICs). The PC should be running
Windows- XP OS. This PC will be acting as the Server PC for NuServer (NuStreams
Server) later;
2. Connect one of the NIC (NIC-1) of the above PC to any one of the two ports on the
XM-2S19 module of the NuStreams-2000i chassis;
3. Connect the other NIC (NIC-2) of the above PC to an Ethernet Switch;
4. Open the "Network & Dial-Up Connection" under "Control Panel" of the Windows-
XP and find the connection icon corresponding to the NIC (NIC-1) attached to XM-
2S19. Select the "Property" of "Internet Protocol (TCP/IP)" and select "Auto Get IP" and
"Auto Get DNS". Once it's done, click on "O.K." and leave the setting window for NIC-1;
5. Find the connection icon corresponding to the NIC (NIC-2) attached to the Ethernet
Switch. Select the "Property" of "Internet Protocol (TCP/IP)" and set the IP, Subnet
Mask, and Gateway of NIC-2 in a way so that it's possible for it to communication with
other PCs connected to the same Ethernet Switch. After it's done, click on "O.K." and
leave the setting window for NIC-2;
6. Run NuWIN (i.e. NuStreams Window) program on the PC with 2 NICs;
7. Run NuWIN program on the remote PC (please note that the remote PC must be
runing Windows- XP OS).