5 learning – Xtramus NuWIN V1.1 User Manual
Page 54

49
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.5 Learning
Choose Learning and its mode to enable the device under test (DUT) to create an
address table according to the source address in the received frame. If Current Port is
chosen, the address of current port will be built into the table. If Multi Selected is
chosen, the SAs of the selected ports will be built into the table. If Chassis is chosen,
the SAs of all the ports of the chassis will be built into the table.
Here is demonstration of this feature through port (0,4,2). Choose Modify Learning
Setup to bring out the Preference window.