Xtramus NuWIN V1.1 User Manual

Page 74

Website: www.

tramus.com

XTRAMUS TECHNOLOGIES

Choose VLANTag in the Selection dialogue. Please note that the Offset value will

automatically change to 12 if VLANTag is chosen. Users may choose the desired

Mode and Loop count for the configured packet.

After setting, send the defined packet through the chosen port. In this case, it’s (0,4,1).

Move the cursor to port (0,4,2) on the chassis panel.

Choose Start Capture Mode and Stop Capture/View to view the packets received

through port (0,4,2).

Now the contents of the defined packets show with all the customized features

captured through port (0,4,2).